Hot Sale PVC/PE Plastic Ampoule Forming Packing Film Materical



Inquire Add to Basket

Port:
Shanghai, China
Production Capacity:
200 Tons/Month
Payment Terms:
T/T, Western Union, Paypal, Money Gram
Model NO.:
PVC/PE
Thickness:
0.3mm
Material Type:
Oral Liquid or Cosmetic or Pescide
Filling Valve Head:
2 Filling Head or 5 Filling Head or More
Dosing Device:
Plunger Pump
Filling Principle:
Vacuum
Packaging Container Lifting Structure:
Pneumatic Lifting
Structure:
Linear
Packaging Type:
Plastic Ampoule or Bottle or Bag
Packaging Material:
Plastic PVC/PE Film
Weight:
40kg/Roll
Trademark:
BSIT
Transport Package:
Export Standard Wooden Case or Paper Case
Specification:
meet with GMP standards
Origin:
Made in China
HS Code:
8422303090
Material:
PVC
Usage:
Packaging Film, Logistics Film, Food&Medicine Film, Decorative Film
Type:
Shrink Film
Transparency:
Transparent
Hardness:
Rigid
Processing Type:
Blow Molding

Product Description

PVC/PE rigid film Introduction:

Due to PE has good heat sealing ability, it can not obstruct the gas but it can obstruct the fluid very well. It is good for fluid medicine packing.
Some factories used old glass bottles before, it has two fatal defects:
1. It is easy broken when you are opening.
2. The fluid in it is easy to expand and crash the bottle when it has fermented. So it will damage the product packaging.
Pharma-grade PVC/PE composite film has kept away from the two defects above. It is mainly produced by officinal PVC film, then heat seal PE film. During the producing, the temperature, coated quantum and solid time are measured strictly to make sure that the product can meet the standard of the same product in the international. The heat sealing ability is 4 times higher than common PVC film. It also has good rigidty, flexility, cash resistance and dilatability. It is suitable for packing all kinds of fluid medicine.

A. Normal technical parameter and standard
1, Appearance size

Pictures	Items	Specification (mm)	Tolerance (mm)
	Thickness	0.3 (normal)	±0.025
	Width	345 (normal)	±1
	Inner core diameter	76mm
	Outside diameter	Less than 350mm (normal)
	Weight /reel	About 40kgs (normal)

2, Appearance quality
The luster transparent is consistent, does not allow any cracks, scars, the accident, perforation, separates out, lacks, greasy dirt. Roll leveled, cut trim, same elasticity.

B. Technical parameter:

Items			Technology requirement	Results	Verdict
Appearance			Should accord prescribe	Accord prescribe	Accord
Physics capability	Water Vapor Transmission 24 h - 23°C - 90% RV - 1 atm		≤2.5g/(m2.24h)	0.8g/(m2.24h)	Accord
	Oxygen Transmission 24 h - 23°C - 75% RH - 100% O² - 1atm		≤20cm3/(m2·24h·0.1MPa)	11cm3/(m2·24h·0.1MPa)	Accord
	Stretch Elongation		Both lengthways and landscape orientation average should more than 40Mpa	lengthways:51Mpa landscape orientation :53MPa	Accord
	Strike intensity		Both lengthways and landscape orientation should not appear more than two pieces damaged	lengthways:No damaged landscape orientation: No damaged	Accord
	Heat up extend and draw back		Within ±6%	Lengthways:-1.7% Landscape orientation :+0.8%	Accord
	Heat sealing intensity		≥6.0N/15mm	125 N/15mm	Accord
Residual Solvent			≤10mg/ m2	2.7mg/	Accord
Chloroethylene monomer			No more than millionth		Accord
dissolved matter test	Clear degree		Colorless, if turbid, compare with No.2 normal turbidity liquid and not more deeper than it	Accord prescribe	Accord
	Facility oxide		the distance of wasting between water liquid and blank liquid should not more than 1.5ml	0.63ml	Accord
	Heavy metal		No more than millionth		Accord
	Fixed matter	water	≤30.0mg/100ml	5.9mg/100ml	Accord
		65%ethanol	≤30.0mg/100ml	7.6mg/100ml	Accord
		hexane	≤30.0mg/100ml	9.5mg/100ml	Accord
Microbial limits	Amount of Microbe		≤1000/100cm2	No check out	Accord
	Amount of Mildew and Microzyme		≤100/100cm2	No check out	Accord
	Amount of coliform		Should not appear	No check out	Accord