High-Speed Rotary Pharmaceutical Tablet Press Machine Gzpt26
Application:
it is work for Pharmaceutical medicine and chemicals, food industry. make round or special tablet or pill
Machine Introduction:
1.GZPT26/32/40/45 Serise High Speed Tablet Press Machine is the newest designed equipment, which totally meet GMP, ISO, and USA FDA requirement.
2.This machine is very nice, decent, and easy to operate, especially the electrical control cabinet is independent from machine, regarding to the safety of the operator.
3.The Punch Type (EU) is D/B/BB/BBS for customer choice. We can supply to you IQ OQ PQ and CE along with the machine.
4.The Punch Type (EU) is D/B/BB/BBS for customer choice.
5.Guarantee 1 year
6.Full compliance with GMP requirements.
7.Supply free FAT testing
8.Supply SAT testing according to customer request.
Machine features:
1. No hand wheel system , HIM controlled.
2.Forced Feeder system supplying Forced Feeder system is controlled byIndependent Motor with variable-frequency
regulating speed technology . According the Material performance to change the running speed , Fundamentally Improve the powder fluidity and Filling performance .Solved the Problem of underfeeding on High Speed .
3. Automatic Weight control function
With Weight Automatic Control Functions ,rejection in batch and in single .Normally ,the weight tolerance can control within ±2% .
4. The Feeder Bottom Surface and Die table surface gap less than 0.05mm ,And with the scraper device ,Reducing the leakage . Increasing the
utilization and Tablet Weight more stable.
5. With The Pre-pressure and Main Pressure Exhaust air Through the Pre-Pression to ensure tablet forming on the Main Pressure position .
Greatly increasing the quality of tablet .
6. Every Punch Pressure will be showed on HMI.
7.Hydralic system automatic function :
Adopt Integrated block Structure ,PLC can control the Hydraulic Pressure value after setting the Hydraulic pressure upper,lower LimiteValue for supporting and
suffering . Which can guarantee low noise running stable and with overload pressure protection .
8. Lubrication system automatic function .
Lubrication Pump will be automatic controlled by System according to lubrication time and parameter. User can adjust according to demand .
9. Rejection System automatic function can rejection single and in Batch , Single rejection will blow the signal bad tablet to reject channel
10. Dusting system automatic function
11. Machine will be automatic stop when achieve the set capacity
12. Machine will be automatic stop when over rang set parameter
13. Touch Screen will automatic closed in the Un-operation state (time can be set according to user demand)
14. Machine will automatic stop in the alarm state meantime will light.
Alarm List
1,Door Protection Alarm
2,Upper & Lower Punch Tight Alarm
3,Leakage of Oil Alarm
4,Oversize Main Pressure Alarm
5,Oversize set value main pressure alarm
6,Upper & Lower Guide alarm
7,Oversize filling alarm
8,Undersize Filling Alarm
9,Overload main motor alarm
10,Feeding Motor Overload alarm
11,Single Punch Upper & Lower Value Over proof alarm
12,Countious punches over proof alarm protection function
13,Electrical system problem alarm
14,Leakage of powder alarm
15,Wrong set parameter alarm
Electric control function :
1,Inch Lubrication function
2,Inch Start , Inch feeding powder
3,Bad tablet/good tablet channel changed by manual (forced rejection)
4,Current capacity Accumulative Output display and clear .
5,Dust collecter and deduster running by manual
6,Hydraulic system pressure ,pre-pressure value display
7,Forced Feeding system , Twice Mixed
8,Tablet Average pressure , Average pressure deviation,single punch Max pressure ,Min Pressure and Punch No will be showed online
9,parameter can be stored and transform.
10,Printing online
11,Pulse sensor can be online monitored
12,Pressure value curve line show online
Sensor system - alarming first and then stopping machine when any one is happened as following situation.
A. Without powder or pellet
B. Open the plastic door
C. Motor of Dust collector is overload
D. Inverter is in trouble
E. Lack of lubrication
Main Technical Data:
| Model | GZPT26 | GZPT32 | GZPT40 | GZPT45 |
| Number of dies | 26 | 32 | 40 | 45 |
| Punch & die type (EU) | D | B | BB | BBS |
| Max diameter of tablet (mm) | 25 | 16 | 13 | 11 |
| Max diameter of abnormal tablet(mm) | 25 | 18 | 16 | 13 |
| Maximum pre-pressure (KN) | 20 | |||
| Maximum main pressure (KN) | 100 | 80 | 80 | 80 |
| Maximum filling depth (mm) | 20 | 16 | 16 | 16 |
| Max output (t/h) | 170000 | 210000 | 260000 | 280000 |
| Idle load noise dB(A) | <75 | |||
| Power of main motor (KW) | 380/220 V 50/60HZ 9.5KW | |||
| Size of machine (mm) | 830×870×1995 | |||
| Net weight of machine (kg) | 1650 | |||
Key components:
| PLC | Siemens | S7 series | Germany |
| Touch Screen | Siemens | Smart (10 inch) | Germany |
| Frequency converter | Siemens | V20 7.5KW | Germany |
| Contactor | Siemens | 3RT series | Germany |
| Short-circuit protector | Siemens | 3RV series | Germany |
| Bearing | IKO/NSK | 6214ZZ | Japan |
| Power switch | Tianyi(joint) | TYX1-P-11/G | China |
| Reduction gears | WUMA | SAF67/77 | China |
| D/L relayer | ELCO | 24VDC | Germany |
| Connection terminal | Weidmuller | ZDU2.5 | Germany |
| Scram button | Schneider | ZB2 | France |
| Lubrication system | Shenxiang | YET-B2/B2P2 | China |
| Hydraulic unit | HAWE | HC14/0.61-B1 | Germany |
| Step motor | SiaoKe(joint) | 90TDY060D4-2 | China |
Layout of the machine