100ml Hot Sale Automatic Soft Laminate Aluminium Plastic Tube Filling and Sealing Machine for Cosmetic cream
Feature:
1. Automatic bar code aligning, especially for oval shape tube
2. Hot air heating for inside sealing and looping cooling water for outside to promise good appearance
3. Dangerous gas generated during the sealing process to be ventilated out through ventilator
4. Change parts promise wide range of diameter of tube
Filling, sealing, batch No. Coding to be incorporated in one machine
5. Tube auto-loading.
7. The total production capacity can be set manually.
9. No tube no filling
Introduction:
This machine is a high-tech product which successfully developed and designed by adopting advanced technology from abroad and strictly meet GMP requirement. PLC controller and color touch screen are applied and made it possible for programmable control of the machine. It can perform the filling for ointment, cream jellies or viscosity material, tail folding, batch number embossing (include manufacture date) automatically. It's ideal equipment for plastic tube and laminated tube filling and sealing for cosmetic, pharmacy, foodstuff and bond industries.
Tube storage can through motor to adjust up-down height as per different tube length. And can With external reversal feeding system, makes tube charging more convenient and tidy.
The mechanical linkage photo sensor precision tolerance is less than 0.2mm. reduce the chromatic aberration scope between tube and eye mark.
Light, electric, pneumatic integrative control, No tube, no filling. Lower pressure, auto display (alarm); The machine stop automatically if tube error or open the safety door.
Double-layer jacket instant heater with inside air heating, it won't damage the pattern outer wall of tube and achieves firm and beautiful sealing effect. Technical data: | BSNF-60A |
| | Configuration Standard | Technical Parameters | Remarks |
| Infrastructure |
| | Main Machine
Landing Area | (about) 2m2
| |
| | Working Area | (about)12m2 | |
| | Water Chiller
Landing Area | (about)1m2 | |
| | Working Area | (about)2m2 | |
| | Whole Machine
(L×W×H) | 1950×1000×1800mm | |
| | Integrated Structure | Union mode | |
| | Weight | (about)850Kg | |
| Machine case body |
| | Case Body Material | 304 | |
| | Opening Mode of Safety Guard | Handle Door | |
| | Safety Guard Material | Organic Glass | |
| | Frame Below Platform | Stainless Steel | |
| | Case Body Shape | Square-shape | |
| Power, Main Motor etc. |
| | Power Supply | 50Hz/380V 3P | |
| | Main Motor | 1.1KW | |
| | Hot Air Generator | 3KW | |
| | Water Chiller | 1.9KW | |
| | Jacket barrel heating power | 2 KW | Optional
Additional cost |
| | Jacket barrel blending power | 0.18 KW | Optional
Additional cost |
| Production Capacity |
| | Operation Speed | 30-50/min/max | |
| | Filling Range | Plastic/laminated tube 5-250ml | |
| | Suitable Tube Length | Plastic/laminated tube 50-210mm | Pipe length more than 210mm should customize |
| | Suitable Tube Diameter | Plastic/laminated tube 13-50mm | |
| Pressing Device |
finished product:
Optional feature:
1. Up-down tube can be detected automatically.
2. Automatic cleaning, dust inside the tube is blowed by compressed air and particulates are collected automatically
3. Filling from the bottom to top of the tube, lest any air inside the tube.
4. Temperature control and blending system for material
5. Liquid level sensor
Main technical: | Appliance | Aluminum tube |
| Range of tube diameter | 10-35mm for metal tube |
| Range of filling volume | 1-150 for metal tube |
| Productivity | 30-60PCS/min |
| Filling error tolerance | 1% |
| Motor | 1.1kw |
| Air pressure | 0.4-0.6Mpa |